Incinérateurs pour l'élimination des déchets médicaux
Description du produit L’incinérateur PLC modèle TS est la dernière conception pour le traitement des déchets, comprend les déchets médicaux, la crémation animale et d’autres déchets solides. Cet équipement de qualité structurelle pour les types de site, les incinérateurs de crémation, le fabricant de crémation, les fabricants de crémation, la crémation des animaux en malaisie, les brûleurs crématoires, l’incinérateur crématorium, les animaux crématoires, comme l’hôpital, le département de l’environnement, les agences de crémation animale, etc. avec double chambre de combustion et chambre de filtre à fumée avec lignes réfractaires et température de la chambre de combustion jusqu’à 1200 ° C. Principales caractéristiques: * Tous les modèles avec double chambre de combustion. * Cheminée / cheminée en acier inoxydable, longue durée de vie. * selon commande * Haute température, longue durée de vie de l’incinérateur. * Installation gratuite ou minimale sur site. * Taux de combustion élevé, de 10 kg à…
Directive environnementale pour le brûlage et l'incinération des déchets solides
Les personnes qui vivent et travaillent au Nunavut ont souvent des options limitées pour une solution rentable et respectueuse de l’environnement gestion des déchets ménagers et autres déchets solides. La présence généralisée de pergélisol, le manque de matériaux de couverture adéquats et les endroits éloignés font du brûlage à l’air libre et de l’incinération une pratique courante et répandue pour réduire le volume de déchets solides et le rendent moins attractif pour la faune. Une grande variété de méthodes de combustion est utilisée, allant de la combustion à l’air libre sur le incinérateurs commerciaux à double chambre broyés à haute température. Généralement, les incinérateurs à haute température sont plus chers acheter et exploiter et causer moins de pollution que les méthodes moins coûteuses et à basse température. Cependant, élevé les incinérateurs à température peuvent éliminer en toute sécurité une plus grande variété de déchets que les méthodes de brûlage à…
Processus de combustion des déchets et d'incinération
La combustion, ou brûlage, des déchets solides se déroule par une série d’étapes. L’eau est d’abord chassée des déchets non brûlés par la chaleur produite par le matériau brûlant à proximité ou par un brûleur auxiliaire. Au fur et à mesure que les déchets se réchauffent, du carbone et d’autres substances sont libérés et convertis en gaz combustibles. C’est ce qu’on appelle la gazéification. Ces gaz peuvent alors se mélanger à l’oxygène. Si la température à l’intérieur de la chambre de combustion est suffisamment élevée et maintenue pendant une période de temps suffisamment longue, les gaz chauds sont complètement convertis en vapeur d’eau et en dioxyde de carbone, qui sont ensuite libérés dans l’air. Si la température à l’intérieur de la chambre de combustion n’est pas suffisamment élevée et que la durée de combustion est trop courte, une conversion complète des gaz combustibles ne se produit pas et une fumée…
Incinérateurs médicaux de déchets
Description du produit Nanjing Clover Medical Technology Co., Ltd. est l’un des principaux fabricants d’incinérateurs de déchets en Chine. Nous sommes un fabricant local et l’un des plus grands exportateurs de Chine. L’équipement technique d’incinérateur pyrolytique est le principal traitement des déchets dans le monde entier, pour les déchets médicaux, l’incinération animale, la crémation des animaux domestiques et autres déchets solides. La capacité de 10 kg / h. Jusqu’à 500 kg / heure, jusqu’à 6 tonnes par jour. Actuellement, nous fournissons différentes séries pour les besoins des clients locaux et concevons un incinérateur mis à jour avec notre technologie de pointe. La conception mise à jour de notre gamme d’incinérateurs en fait l’un des plus rentables au monde. L’incinérateur PLC modèle TS est la dernière conception pour le traitement des déchets, comprend les déchets médicaux, la crémation animale et d’autres déchets solides. Cet équipement de qualité structurelle pour les types…
Incinérateurs modernes
Description du produit Principales caractéristiques: * Tous les modèles avec double chambre de combustion. * Cheminée / cheminée en acier inoxydable, longue durée de vie. * selon commande * Haute température, longue durée de vie de l’incinérateur. * Installation gratuite ou minimale sur site. * Taux de combustion élevé, de 10 kg à 500 kg par heure, jusqu’à 6 tonnes par jour. * Plan de contrôle PLC. * selon commande * Nouveau design pour les entreprises de crémation d’animaux de compagnie. * Garantie d’un an sur l’incinérateur et les pièces en stock. L’incinérateur PLC modèle TS est la dernière conception pour le traitement des déchets, comprend les déchets médicaux, la crémation animale et d’autres déchets solides. Cet équipement de qualité structurelle pour les types de sites, comme l’hôpital, l’incinérateur diesel et gaz 50 kg par heure, la chambre du brûleur diesel, l’incinérateur de la chambre du brûleur diesel, les brûleurs…
Incinérateur
Informations de base. N ° de modèle: 20 kg par heure Sources de pullution: traitement des déchets solides Méthodes de traitement: combustion Marchés d’exportation: mondiaux Information additionnelle. Marque Déposée: Clover Description du produit Clover fournit des incinérateurs de déchets médicaux, des crémateurs pour animaux de compagnie et animaux, ainsi que d’autres incinérateurs de déchets solides dans plus de 30 pays. Nous avons repensé la configuration du revêtement des incinérateurs. Nous avons également conçu et installé notre propre système informatique PLC dans le système d’exploitation de l’incinérateur. Coûts d’installation des incinérateurs médicaux, Rateurs d’incinération médicale en Chine, incinération médicale, conteneur d’incinération médicale, incinération médicale en Chine, Clover sait qu’il est important de mieux les construire, de rester simple et d’offrir un excellent service. Nous fabriquons des produits de qualité qui offrent un excellent retour sur investissement, nos incinérateurs sont les plus robustes et les plus efficaces thermiquement de l’industrie. Les lignes…
Le nouvel incinérateur Courtice enregistre de nouveaux retards
CLARINGTON – La nouvelle installation d’énergie issue des déchets de Clarington sera retardée une deuxième fois parce que les chaudières ne fonctionnent pas correctement et que la période de démarrage en cours pourrait coûter 1 million de dollars supplémentaires à la région de Durham. «Je préfère le voir retardé et bien fait plutôt que précipité», a déclaré le maire de Clarington, Adrian Foster. L’usine du Durham York Energy Centre, située à Courtice, devait être pleinement opérationnelle le 14 décembre 2014. Le Durham York Energy Centre ne devrait pas être en parfait état de fonctionnement avant le dernier trimestre de 2015. Les principaux systèmes de l’installation EFW ont été testés. La température de la chaudière est suffisamment élevée pour le processus de combustion, mais la température de la vapeur n’est pas assez élevée et les responsables ne sont pas sûrs du problème, explique le commissaire des travaux de Durham, Cliff Curtis.…
Medical Incinerator Specification
Capacity Not less than 500Kg/hr. Operation 24hr-7days/week continuous operation. Combustion chamber 2 combustion chamber. Temp. First combustion chamber 800-1000 C. Secandry combustion chamber 1000-1200 C, with the possibility to be upgraded to 1400 C. Combustion Efficiency 99.99% Retention time Of the flow gases not less than 2 Sec in the hot portion. Excess Oxygen concentration Of primary combustion chamber 3-6% max. Refractory The chambers should be lined with high thermal insulating refractory bricks with suitable thickness and with highly temp. resistance. Not less than 1400 C for the first combustion chamber, and not less than 1600 C for the secandry combustion chamber, and at the same time prevent the Temp. of the outside body of the chamber not higher than 70 C. Doors Should be lined with the same bricks, and the edges lined with special suitable insulating material to prevent any gas escaping, and the doors should be kept under negative pressure during the operation. Air Emission Control System With high destruction and removal efficiency (DRE). Not less than 99.9999 as per KEPA. Wet System If the system equiped with a CEMS washing the flow gas with water, then it should be manufactured from suitable anti corrossion materials, and equiped with pH meter to measure and neutralize the water. It should be able to use the water in closed recycled circuit many times before treating/ discharging into the sewage system in compliance with KEPARS. Chemical dosing It should be equiped with suitable autochemical dosing system to control the pH for the water of the wet scrubber system including sensors. Chimney It should be suitable with the capacity and the technical specifications, with height not less than 12m from ground level. With easy opennable sampling point equal about 3 inch, and the optimum sampling locations is at least 8D downstream direction and 2D upstream from any flow disturbancies. Sampling point Should be equiped with a platform located down the sampling point by a distance not less than 1 m, and equiped with suitable stairs from ground to the port with comfortable slope. Ash Removal It should be auto ash removal system. Fuel It should be dual system, such as diesel and natural gas. Feeding System Should be auto feeding system into primary chamber. Control Room Should be equiped with a control panel shows Temp. of the combustion burners, gas monitoring, digital Temp. indecation for the primary/secondary chambers, digital Temp. indication for the gases…etc. it should be also Auto operation, burnures on/off auto lamps switch, auto start/stop for air emission control system, auto gas continuous monitoring system reading and print out of gas emission parameters…etc. Cooling System The primary chamber should be provided with auto cooling systemthrough nozzles to permit direct cooling if the Temp. will be heigher than 1100 C. Inter-lock system The incinerator should be equiped with inter-lock system to prevent feeding the waste to the primary chamber if the combustion Temp. less than 500 C. Flue treatment and cleaning To consist a combined system (wet/dry), using water, lime, active carbon and ceramic filters. Quenching system/Heat exchanger Should be made and manufactured from anti corrosion and acid attack materials such as stainless steel 316 or equivalent. Noise Level Not more than 85 dBA during normal operation. Inaddition The desigh should insure that responsive fail-safe control systems are used. The incinerator should be installed inside closed suitable building with good aeration and ventilation system. The building has facilities for off-loading of wastes from transport vehicles. Auto cleaning system for trucks and waste containers, and cool storage area…etc. The quotation should included list of original spare parts for 7 years. The quotation should include supervising, starting up and training of the operators and ministry of health engineers inside/outside Kuwait. Detailed drawings, catalogs should be included.
Medical Incinerator Specification
Capacity Not less than 500Kg/hr. Operation 24hr-7days/week continuous operation. Combustion chamber 2 combustion chamber. Temp. First combustion chamber 800-1000 C. Secandry combustion chamber 1000-1200 C, with the possibility to be upgraded to 1400 C. Combustion Efficiency 99.99% Retention time Of the flow gases not less than 2 Sec in the hot portion. Excess Oxygen concentration Of primary combustion chamber 3-6% max. Refractory The chambers should be lined with high thermal insulating refractory bricks with suitable thickness and with highly temp. resistance. Not less than 1400 C for the first combustion chamber, and not less than 1600 C for the secandry combustion chamber, and at the same time prevent the Temp. of the outside body of the chamber not higher than 70 C. Doors Should be lined with the same bricks, and the edges lined with special suitable insulating material to prevent any gas escaping, and the doors should be kept under negative pressure during the operation. Air Emission Control System With high destruction and removal efficiency (DRE). Not less than 99.9999 as per KEPA. Wet System If the system equiped with a CEMS washing the flow gas with water, then it should be manufactured from suitable anti corrossion materials, and equiped with pH meter to measure and neutralize the water. It should be able to use the water in closed recycled circuit many times before treating/ discharging into the sewage system in compliance with KEPARS. Chemical dosing It should be equiped with suitable autochemical dosing system to control the pH for the water of the wet scrubber system including sensors. Chimney It should be suitable with the capacity and the technical specifications, with height not less than 12m from ground level. With easy opennable sampling point equal about 3 inch, and the optimum sampling locations is at least 8D downstream direction and 2D upstream from any flow disturbancies. Sampling point Should be equiped with a platform located down the sampling point by a distance not less than 1 m, and equiped with suitable stairs from ground to the port with comfortable slope. Ash Removal It should be auto ash removal system. Fuel It should be dual system, such as diesel and natural gas. Feeding System Should be auto feeding system into primary chamber. Control Room Should be equiped with a control panel shows Temp. of the combustion burners, gas monitoring, digital Temp. indecation for the primary/secondary chambers, digital Temp. indication for the gases…etc. it should be also Auto operation, burnures on/off auto lamps switch, auto start/stop for air emission control system, auto gas continuous monitoring system reading and print out of gas emission parameters…etc. Cooling System The primary chamber should be provided with auto cooling systemthrough nozzles to permit direct cooling if the Temp. will be heigher than 1100 C. Inter-lock system The incinerator should be equiped with inter-lock system to prevent feeding the waste to the primary chamber if the combustion Temp. less than 500 C. Flue treatment and cleaning To consist a combined system (wet/dry), using water, lime, active carbon and ceramic filters. Quenching system/Heat exchanger Should be made and manufactured from anti corrosion and acid attack materials such as stainless steel 316 or equivalent. Noise Level Not more than 85 dBA during normal operation. Inaddition The desigh should insure that responsive fail-safe control systems are used. The incinerator should be installed inside closed suitable building with good aeration and ventilation system. The building has facilities for off-loading of wastes from transport vehicles. Auto cleaning system for trucks and waste containers, and cool storage area…etc. The quotation should included list of original spare parts for 7 years. The quotation should include supervising, starting up and training of the operators and ministry of health engineers inside/outside Kuwait. Detailed drawings, catalogs should be included.
fabricantes de incineradores de residuos china
5-1- Chambre de post combustion est installée au dessus du foyer de combustion, elle est constituée d’un cylindre métallique revêtu intérieurement d’une couche d ‘isolant et d’une couche de matériaux réfractaires. 5-2- ¿Volumen interior ?: 2,1 m3 Est dimensionnée pour pouvoir garantir un temps de fumée de 2 secondes à 1100 ° C avec un pourcentage d’oxygène libre d’au moins 6%. 5-3 -Accesorios ? Trappe de visite boulonnée frontal pour permettre l’inspection périodique ? La liaison à la chambre de combustion est tapissée de réfractaire ? Instalación de les br? Leurs ? Instalación de sondes de mesure température PRODUCCIÓN DE L’AIR COMBURANT DE LA CHAMBRE DE POST COMBUSTION Centrifugadora Ventilateur ? Tuyauteries de distribution d’air ? Série de vannes de distribution d’air ? Soupape de régulation de l’air soufflé asservi par la sonde du débit d ‘oxygène BRULEUR DE LA CHAMBRE DE POST COMBUSTION Sont prévus 2 br? Leurs du…